 |
In addition to the process-critical equipment assets
found in industrial facilities, there are often a
host of essential and auxiliary assets that make up
the balance of the plant such as pumps, motors, blowers,
heat exchangers, fans, and others. This equipment
may be spared or not, and its impact on the process
stream varies from moderate to minor. Regardless,
such machines – just like their "critical"
counterparts – can benefit from condition monitoring.
GE offers affordable, effective portable, wireless
and permanent condition monitoring systems for BOP
assets.
|
 |
To address changing power generation needs we have developed a comprehensive system for monitoring the condition of hydroelectric turbine-generators, including a 3500 Series monitor, air gap and seismic sensors, System 1® software, and services.
|
 |
Whether monitoring critical turbine generators, massive paper machines, kilns, compressors, or any of the hundreds of motors, electrical assets, pumps, fans, gearboxes and fixed equipment throughout a mill, we can provide the right GE hardware, software, and service solutions to help drive your pulp and paper business objectives.
|
 |
Coal-Fired Power Plant Condition Monitoring
Coal-fired plants around the world have relied on Bently Nevada machinery protection and condition monitoring systems for more than four decades. Our informative brochure describes the comprehensive, plant-wide solutions we offer to address nearly every production asset in the plant, whether rotating or fixed.
|
 |
Our comprehensive offering of hardware, software, and services is specifically designed to address the special monitoring requirements of reciprocating compressors and uses our state-of-the-art 3500 Series Machinery Protection System and System 1® optimization and diagnostic software. Our monitoring capabilities address more than just rider band wear, including valve condition, pressure ring condition, pressure packing case condition, crosshead pin condition, and many others.
|
 |
System 1* PEMS Package for GE LM Gas Turbines
The System 1* Predictive Emissions Monitoring System (PEMS) is a software-only solution that provides a prediction on the level of emissions generated by GE LM2500 SAC gas turbines on many offshore platforms. It can predict with high accuracy the level of NOx, CO, CO2, SO2 and unburned hydrocarbon generated by these gas turbines based on ambient conditions, fuel composition and machine operating conditions while taking into account real time degradations. It leverages the Bently Nevada System 1 condition monitoring platform and is designed to be used outside of United States regulatory codes.
|
 |
Coal Boiler Optimization
Coal Boiler Optimizer (CBO) is a software application designed to optimize fossil-fired units such as coal boilers and is based on GE’s ecomagination certified product Kn3*. It uses a combination of predictive models in combination with a flexible multi-objective optimizer to accomplish its goal. CBO is an online system that continuously retrains its models to reflect current operating conditions while the optimizer provides suggested boiler control set points that may be acted on by an operator in open loop fashion or in closed loop fashion with the plant’s distributed control system (DCS).
|
 |
Delayed Coker Drum Monitoring
Our monitoring package provides customers with real-time status updating of the drum cleaning process, reducing cleaning cycle time, providing energy savings and a dramatic reduction in the operator's exposure time to the environment surrounding a coke drum.
|
 |
Relief Valve Leak Detection System
This system provides an on-line leak monitoring and detection solution for all your process relief valves. A Relief Valve Leak Detection RulePak is provided to automatically process independent dual measurement values to enable dependable alarm capability in event of relief valve leakage.
|
|
Spotlight
Payback Profile(744KB PDF)
Condition Monitoring Pays Off for Finnish Pulp & Paper Mill
|
Bently Nevada Product Line Support
Related Links
|
